Kaishan drilling rigs

Surface Top Hammer Drill Rig Series

Full hydraulic top hammer drill rig for road cuts, foundations and open-pit bench blasting. Compare published hole diameter and depth model by model.

Request a Quote Browse Models

Applications

Road cuts
Foundation engineering
Open-pit mining
Pipeline trenches

Key features

✓Hydraulic top hammer (HC150/HC160 or HC95LJQ)
✓Vertical, inclined and horizontal holes
✓Carrier rotation covers a wide pattern per setup
✓Onboard Kaishan screw air compressor
✓FOPS/ROPS cab with A/C

Quick Selection Guide

Use the published hole range, drive arrangement and duty notes to narrow the Surface Top Hammer Series range before opening a model page.

RequirementModels to reviewPublished selection basis

High-frequency drilling in medium-hard rock

KL511

Wide pattern per set-up; onboard Kaishan screw compressor (published).

Harder rock / higher penetration demand

KL510 / KL511

KL511 carries the higher engine power and air delivery of the pair; published figures per model.

Not sure which model fits your project? Send your hole diameter, depth, site conditions and compressor requirement — we will confirm the match before quotation.

Full Specification Comparison

Compare all models below. Click any model name to view full specifications and inquiry details.

Kaishan KL511 is a full hydraulic surface top hammer drill rig for vertical, inclined and horizontal blast holes. A heavy-duty hydraulic top hammer (HC150/HC160) drills into medium-hard rock. The carrier rotates to cover a wide hole pattern per setup, speeding up hole-pattern drilling; track leveling and carrier rotation are optionally wireless remote controlled. Powered by a Cummins QSC8.3 engine with an onboard Kaishan screw air compressor, FOPS/ROPS cab with A/C, rated to 30° gradeability. At publication, the series covers 2 models — key specifications are listed below.

Model	Machine	Hole diameter (mm)	Pressure (bar)	Weight (kg)	Gradeability (°)
KL511 →	KL511 Surface Top Hammer Drilling Rig	76-127/64-115 mm	130-140/160-200 bar	17500 kg	30 °
KL510 →	KL510 Surface Top Hammer Drilling Rig	64–115 mm	210 bar	16500 kg	30 °

Complete specifications by model

KL511 →

Model: KL511
Tooling & air — Impact frequency: 38-41/38-45 Hz
Tooling & air — Impact pressure: 130-140/160-200 bar
Tooling & air — Propelling force: 19 kN
Tooling & air — Rotation speed: 129/130 rpm
Drilling depth: 25 m
Hole diameter: 76-127/64-115 mm
Air compressor flow: 9.7 m³/min
Air compressor model: Kaishan screw compressor
Air compressor pressure: 10 bar
Engine model: Cummins QSC8.3-C260-30
Engine power: 194 kW
Engine speed: 2200 rpm
Impact power: 21/27 kW
Boom fold angle: 87°
Boom lift angle: 83°
Boom swing angle: -56°/52°, -20°/94°
Compensation stroke: 1353 mm
Performance & mobility — Gradeability: 30°
Performance & mobility — Traction: 120 kN
Performance & mobility — Tramming speed: 0-3.5 km/h
Dimensions & weight — Overall dimensions (L × W × H): 11100×2520×3320 mm
Dimensions & weight — Fuel tank capacity: 350 L
Dimensions & weight — Ground clearance: 420 mm
Dimensions & weight — Hydraulic oil capacity: 200 L
Dimensions & weight — Weight: 17500 kg
Drill rod: T45/T51 × 3660mm (6+1)
Rock drill model: HC150/HC160
Rock drill stroke: 4150 mm
Dust collector: 23m³/min @ 1000mmH2O
Cab: FOPS/ROPS, A/C, radio, ≤85dB(A)
Voltage: 24V DC

KL510 →

Model: KL510
Tooling & air — Propelling force: 19 kN
Tooling & air — Rotation pressure: 210 bar
Tooling & air — Rotation speed: 150 rpm
Drilling depth: 25 m
Hole diameter: 64-115 mm
Air compressor flow: 8.5 m³/min
Air compressor model: Yunnan Kaishan screw compressor
Air compressor pressure: 10 bar
Engine model: Cummins QSC8.3-C240-30
Engine power: 179 kW
Engine speed: 2200 rpm
Impact power: 24 kW
Performance & mobility — Gradeability: 30°
Performance & mobility — Tramming speed: 0-3.5 km/h
Dimensions & weight — Overall dimensions (L × W × H): 10500×2450×3200 mm
Dimensions & weight — Fuel tank capacity: 340 L
Dimensions & weight — Ground clearance: 430 mm
Dimensions & weight — Hydraulic oil capacity: 250 L
Dimensions & weight — Weight: 16500 kg
Drill rod diameter: 45/38mm
Drill rod length: 3660 mm
Rock drill model: HC95LQ
Rock drill stroke: 4150 mm
Dust collector: 20m³/min @ 1000mmH2O
Cab: ROPS/FOPS, A/C, radio/MP3

Configuration & customization

Each rig can be configured to your project. Standard and optional packages include:

Wireless remote control
Dust collector
Cold-start kit

Frequently asked questions

How do I choose between KL511 and KL510?

Compare the two rows in the model table above — focus on hole diameter, drilling depth and power against your project conditions. Our team can confirm the match for your site.

What applications is this series suited to?

Road cuts, Foundation engineering, Open-pit mining, Pipeline trenches.

Can the equipment be configured to my project?

Yes — standard and optional packages are listed under Configuration & customization above. Send your project details through the inquiry form and we will confirm the matching configuration.